TNMG160404-FM5 WSM20S Carbide Insert, Grade WSM20S, PVD - Walter 7091926

Walter

TNMG160404-FM5 WSM20S Carbide Insert, Grade WSM20S, PVD - Walter 7091926

MFR# 7091926ISO/ANSI# TNMG331-FM5 WSM20SSeries TNMG-FM5

$18.99List $23.93 Save 20%
Usually ships in 1-3 business days

Ship times are estimates. We confirm availability on every order and email you right away if anything changes.

Sold in multiples of 10 — minimum order 10

Supplier prices are confirmed before checkout. If one has changed since this page was updated, we show you the new price before you pay.

Request a quote
  • Fast sourcing
  • Regrinding available
  • 20+ yrs expertise
IC3/8
ShapeTriangle
GradeWSM20S
MaterialCarbide

Description

The Walter 7091926 is a TNMG160404-FM5 (ANSI TNMG331-FM5) PVD-coated carbide turning insert in Tiger·tec grade WSM20S. It is a 60° triangle, negative-rake, neutral-hand insert with six cutting edges, a 3/8" (9.53 mm) inscribed circle, 3/16" thickness, 1/64" (0.40 mm) corner radius and a honed, chamfered edge, held by pin or clamp. The FM5 chip breaker is for finishing, with stainless steel and superalloys/titanium as the primary workpieces and steel as secondary. Sold per insert in multiples of 10.

Specifications

Chip breakerFM5
Chip breaker operationFinishing
Clearance codeN
Coating processPVD
Corner radius in1/64
Country of originGermany
Cutting edge styleChamfered & Honed
Full radiusNo
Hole diameter0.1500
Included angle60degree
Industry standard numberTNMG331-FM5 WSM20S
Inscribed circle in3/8
Insert handNeutral
Insert holding methodClamp; Pin
Insert length0.6500
Insert materialCarbide
Insert shapeTriangle
Insert size code331
Insert styleTNMG
Insert thickness in3/16
Iso codeTNMG160404-FM5 WSM20S
Iso size code160404
Lead angle60degree
Manufacturers catalog number7091926
Manufacturer gradeWSM20S
Material gradeS20; M20; P20
Maximum depth of cut0.6500
Multi use applicationTurning; Facing; Boring
Multi use toolYes
Number of cutting edges6
Primary workpiece materialStainless Steel; Superalloys & Titanium
RakeNegative
Rake angle10
Relief angle0
Secondary workpiece materialSteel
Side clearanceNegative
StandardsANSI; ISO
Tolerance codeM
Width0.650
Wiper edgeNo
Can't find your exact tool?Send us a part number — we'll cross-reference it. Dull tools?Regrinding extends tool life and saves cost.

Alternate & equivalent tools

Matched on diameter, flute count, and material. Need a specific brand or coating? Cross-reference this tool.

Spec-matched alternates load as the catalog fills in. Meanwhile, browse the End Mills collection and filter by diameter, flutes & length of cut.