WNMG080408-MM5 WSM30S Carbide Insert, Grade WSM30S, PVD - Walter 7251993

Walter

WNMG080408-MM5 WSM30S Carbide Insert, Grade WSM30S, PVD - Walter 7251993

MFR# 7251993ISO/ANSI# WNMG432-MM5 WSM30SSeries WNMG-MM5

$24.00List $30.24 Save 20%
Usually ships in 1-3 business days

Ship times are estimates. We confirm availability on every order and email you right away if anything changes.

Sold in multiples of 10 — minimum order 10

Supplier prices are confirmed before checkout. If one has changed since this page was updated, we show you the new price before you pay.

Request a quote
  • Fast sourcing
  • Regrinding available
  • 20+ yrs expertise
IC1/2
ShapeTrigon
GradeWSM30S
MaterialCarbide

Description

The Walter 7251993 is a WNMG080408-MM5 (ANSI WNMG432-MM5) PVD-coated carbide turning insert in Tiger·tec grade WSM30S. It is an 80° trigon, negative-rake, neutral-hand insert with six cutting edges, a 1/2" inscribed circle, 3/16" thickness, 1/32" (0.0315") corner radius and a honed, chamfered edge, held by pin or clamp. The MM5 chip breaker covers medium machining and roughing, with stainless steel and superalloys/titanium as the primary workpieces and steel as secondary. Sold per insert in multiples of 10.

Specifications

Chip breakerMM5
Chip breaker operationMedium Machining; Roughing
Clearance codeN
Coating processPVD
Corner radius in1/32
Country of originGermany
Cutting edge styleChamfered & Honed
Full radiusNo
Hole diameter0.2030
Included angle80degree
Industry standard numberWNMG432-MM5 WSM30S
Inscribed circle in1/2
Insert handNeutral
Insert holding methodClamp; Pin
Insert length0.6840
Insert materialCarbide
Insert shapeTrigon
Insert size code432
Insert styleWNMG
Insert thickness in3/16
Iso codeWNMG080408-MM5 WSM30S
Lead angle80degree
Manufacturers catalog number7251993
Manufacturer gradeWSM30S
Material gradeS30; M30; P30
Maximum depth of cut0.3420
Multi use applicationTurning; Facing; Boring
Multi use toolYes
Number of cutting edges6
Primary workpiece materialStainless Steel; Superalloys & Titanium
RakeNegative
Rake angle20
Relief angle0
Secondary workpiece materialSteel
Side clearanceNegative
StandardsANSI; ISO
Tolerance codeM
Width0.684
Wiper edgeNo
Can't find your exact tool?Send us a part number — we'll cross-reference it. Dull tools?Regrinding extends tool life and saves cost.

Alternate & equivalent tools

Matched on diameter, flute count, and material. Need a specific brand or coating? Cross-reference this tool.

Spec-matched alternates load as the catalog fills in. Meanwhile, browse the End Mills collection and filter by diameter, flutes & length of cut.